GLS
Apr 19, 05:15 AM
I've done the following once a week on all the laptops we have here, without worry:
-Rubbing alcohol on old washcloth. Takes care of case, keyboard, touchpad, wrist area. Don't saturate the washcloth; just enough to dampen it, then wipe all the surfaces except screen.
-Eyeglass cleaner from drugstore for display. Comes in small spray bottle. Use it with a microfiber cloth for the display. Same as with rubbing alcohol; just enough to dampen the cloth, then wipe display.
Enjoy.
-Rubbing alcohol on old washcloth. Takes care of case, keyboard, touchpad, wrist area. Don't saturate the washcloth; just enough to dampen it, then wipe all the surfaces except screen.
-Eyeglass cleaner from drugstore for display. Comes in small spray bottle. Use it with a microfiber cloth for the display. Same as with rubbing alcohol; just enough to dampen the cloth, then wipe display.
Enjoy.
cootersgarage6
Feb 11, 10:52 PM
Hi, I want to put some CD's that I purchased on my iTunes to put on my iPod. The only problem is that I am getting a new laptop soon, my BlackBook is dyeing.)))): Well, so far I have bought all my music on iTunes, but it's so expensive. I bought many CD's like I said, and I'm putting them on iTunes. When I plug the iPod into a new computer, it would ask me if I wanted to transfer my purchases. And everything that I bought would transfer. The songs that I got from other websites wouldn't transfer. But If I import the CD's through iTunes, will it still transfer to the new computer? Or do they have to be bought from iTunes?
Thank You!
Thank You!
NZed
Mar 1, 04:07 AM
use Greenpois0n instead or Limera1n
zombitronic
Jan 17, 08:42 AM
It's like 1908 meets 2008.
more...
Kebabselector
Sep 25, 07:04 PM
It's like Speed: 2. Props to the rail system for averting disaster though.
Pity UB40 weren't on this runaway train - might have done us all a favour.
Pity UB40 weren't on this runaway train - might have done us all a favour.
mjwatt29
Mar 25, 05:11 PM
Hello:
I just recently bought a new MacBook pro (10.6.7) and am trying to restore a winclone (2.2) windows 7 image (31Gb, stored on a external HD) to a new bootcamp partition (110Gb, MS-DOS (FAT32)), and when I mount the image and attempt to restore, I get the following error:
=====restoring image from disk image=============
more...
george hill tim duncan
numbers from Tim Duncan#39;s
more...
tim duncan dunking. minutes
tim duncan wife and kids.
more...
tim duncan sneakers nike.
tim duncan
more...
The Spurs Tim Duncan is known
tim duncan wife and kids.
more...
tim duncan dunking.
tim duncan dunking.
more...
Tim Duncan
tim duncan sneakers.
Tim Duncan also has four
I just recently bought a new MacBook pro (10.6.7) and am trying to restore a winclone (2.2) windows 7 image (31Gb, stored on a external HD) to a new bootcamp partition (110Gb, MS-DOS (FAT32)), and when I mount the image and attempt to restore, I get the following error:
=====restoring image from disk image=============
more...
neutrino23
Dec 18, 11:37 PM
Maybe, I've never gone to MacWorld even though I live in San Jose. Only hurdle for me would be taking a day off of work, although i've got plenty of vacation time. Not much of a drinker myself, and not too familiar with SF. Last time I went to meet-up with some people in SF, we ended up in a "massage" parlor. :eek::o:D
Wow. What an adventure!
How amazing thought. People fly from Europe and Asia to visit SF and you are so close.
Wow. What an adventure!
How amazing thought. People fly from Europe and Asia to visit SF and you are so close.
outerspaceapple
Oct 31, 01:49 AM
Prior to this G5 I'd primarily used laptops for years. Particularly like the ALPowerbook keyboard for feel. Can't stand the normal Apple keyboards, or any normal ones really. Got the icekey maybe 1 month ago. I absolutely love it. And you don't have that issue...the only one...with the Powerbook when you are typing in Word, and go to hit the right shift key, hit the up button, and delete the last line or two...hate that...have to undo quickly. Not a problem with the bigger Icekey keyboard.
Lol, never encounterd that problem. This forum really helps me too, since I plan on buying a pmac G5, but i've used laptops all my life & want the small & sleek laptop keyboard feel.
Cheers,
outerspaceapple
Lol, never encounterd that problem. This forum really helps me too, since I plan on buying a pmac G5, but i've used laptops all my life & want the small & sleek laptop keyboard feel.
Cheers,
outerspaceapple
more...
thermodynamic
Apr 18, 05:42 PM
Howdy. I have a Logitech G5, Logitech G9, and Razer Lachesis. I love 'em all but none has a Mac driver. :(
Do you use a laser mouse? If so, which do you use?
(I don't game, but the higher sensitivity works nicely for larger screen resolutions and some graphic design)
Thx!
Do you use a laser mouse? If so, which do you use?
(I don't game, but the higher sensitivity works nicely for larger screen resolutions and some graphic design)
Thx!
UTclassof89
Mar 28, 08:27 AM
^ ditto.
I think I'd expect a better return from a Nigerian prince over Apple stock at this point.
I think I'd expect a better return from a Nigerian prince over Apple stock at this point.
more...
pukifloyd
Aug 9, 02:08 AM
The last set would be perfect for when the in-laws come over.
:D
great designs ...i would love to have the ones in picture 3, 5, 7 and the last one...
:D
great designs ...i would love to have the ones in picture 3, 5, 7 and the last one...
InfoTime
Apr 29, 04:17 PM
A client of mine spilled a Diet Coke on her unibody white MacBook. I got the machine weeks after the event and after Apple told her it'd be $750 to repair. The machine would not power up or show any signs of life.
I took it apart thinking I'd find gunk on the parts and start by cleaning it up. So, I completely disassembled it only to find nothing gross inside. In fact I found no evidence of a spill. I did not take the top case apart - the keyboard and trackpad are still attached. So it appears that the spill was probably contained within the top case and didn't leak down onto the logic board.
I'm thinking about replacing the top case as I'm pretty sure that's screwed up. But, short of ordering one, reassembling everything and trying to see if that fixes it, is there some way to further troubleshoot?
I took it apart thinking I'd find gunk on the parts and start by cleaning it up. So, I completely disassembled it only to find nothing gross inside. In fact I found no evidence of a spill. I did not take the top case apart - the keyboard and trackpad are still attached. So it appears that the spill was probably contained within the top case and didn't leak down onto the logic board.
I'm thinking about replacing the top case as I'm pretty sure that's screwed up. But, short of ordering one, reassembling everything and trying to see if that fixes it, is there some way to further troubleshoot?
more...
jdreier
May 3, 08:41 AM
Thanks for the reply. Right now i've got the plastic clips and crappy thermal paste from best buy in the mac mini. It gets the job done, but I'm thinking about redoing the thermal paste with better stuff and adding nylon screws, that should help keep temps down... and add a little life to the already ancient mac mini.
With the plastic clips, the springs were required to maintain pressure between the heatsink and the CPU. You don't need the springs if you're using screws and nuts. I used nylon screws and nylon lock nuts. I see temps a few degrees lower than yours while encoding. Remember not to use too much thermal paste.
With the plastic clips, the springs were required to maintain pressure between the heatsink and the CPU. You don't need the springs if you're using screws and nuts. I used nylon screws and nylon lock nuts. I see temps a few degrees lower than yours while encoding. Remember not to use too much thermal paste.
nomad01
Sep 21, 06:07 AM
storagereview.com
Thanks for that. I'll have a look through.
I was more interested to see if anyone was going to say "STAY AWAY from X brand" or "that won't work in a PM".
Cheers
Steve
Thanks for that. I'll have a look through.
I was more interested to see if anyone was going to say "STAY AWAY from X brand" or "that won't work in a PM".
Cheers
Steve
more...
kainjow
Oct 16, 11:13 PM
Wow that was cool. Great job hob! :D
Agree. Well done.
Agree. Well done.
iGary
Dec 2, 06:48 PM
All the Ebay scammers are running from there to Scamlist.
more...
Embio
Mar 12, 06:01 AM
Because it is a beta?
lopoz
Apr 16, 05:25 AM
What program is that? And yes, I'm also noticing better (i.e. less accelerated) mouse movement in Lion (using Magic Mouse).
By no problem, do you mean that you feel no difference between 10.6 an 10.7?
Well the cursor is not as fast as in Windows, but it's managable.
It means that the cursor movement is not linear to the mouse movement. Google it and you will see that it's a huge issue for people that want to game on their Macs, especially for Windows switchers that are not used to it. The worst part is that there is no setting in OS X to remove it.
Here are two images that illustrate it (from a 3rd party software that removes the acceleration)
Without this program: http://triq.net/files/gallery/snip2.png With this program: http://triq.net/files/gallery/snip1.png
By no problem, do you mean that you feel no difference between 10.6 an 10.7?
Well the cursor is not as fast as in Windows, but it's managable.
It means that the cursor movement is not linear to the mouse movement. Google it and you will see that it's a huge issue for people that want to game on their Macs, especially for Windows switchers that are not used to it. The worst part is that there is no setting in OS X to remove it.
Here are two images that illustrate it (from a 3rd party software that removes the acceleration)
Without this program: http://triq.net/files/gallery/snip2.png With this program: http://triq.net/files/gallery/snip1.png
blevins321
May 3, 09:11 AM
Are you using the Bluetooth keyboard? That won't work with Windows XP setup. You'll need to have a wired one hooked up until after the Bootcamp drivers are installed. If you only need one program, though, you might be better off with Parallels or VMWare Fusion so that you can continue doing tasks on the Mac OS at the same time.
sonofpismo
Dec 20, 04:54 AM
Last time I went to meet-up with some people in SF, we ended up in a "massage" parlor. :eek::o:D
More information please...
:cool:
More information please...
:cool:
4JNA
Jul 1, 08:41 PM
Yeah, this display is the newer and latest model (old was 2405wfp) and features adjustable stand, upgraded panel, usb hub and CF and other memory slots on the side built in.
i have this model and can add a 'highly recommend' for what it's worth. bright, amazing stand (up/down/swivel), and due to the extra inputs, i'm also currently using this for my PS3 and it looks amazing for games.
great price. if i didn't own one, i would buy this. best of luck.
i have this model and can add a 'highly recommend' for what it's worth. bright, amazing stand (up/down/swivel), and due to the extra inputs, i'm also currently using this for my PS3 and it looks amazing for games.
great price. if i didn't own one, i would buy this. best of luck.
Sun Baked
Sep 12, 12:40 PM
Still seems a little unreasonable, as to the timing of the switch.
But explaining that would actually bring economic reasoning into the debate.
Can't have that... ruins the fantasy.
But explaining that would actually bring economic reasoning into the debate.
Can't have that... ruins the fantasy.
sk3pt1c
Dec 16, 08:13 AM
a friend asked me to post this.
What he needs to do is have photoshop open up a text file that contains lines of file names, eg 2039-299434322.jpeg and have it create and save dummy files out of those filenames in a certain folder.
From what i gathered the purpose is to have the files ready so he can then find the ones he wants to put stuff into and edit them.
He wants to script this because there will be lots of files to create.
Any thoughts/ideas?
What he needs to do is have photoshop open up a text file that contains lines of file names, eg 2039-299434322.jpeg and have it create and save dummy files out of those filenames in a certain folder.
From what i gathered the purpose is to have the files ready so he can then find the ones he wants to put stuff into and edit them.
He wants to script this because there will be lots of files to create.
Any thoughts/ideas?
clayj
Sep 22, 06:17 PM
Wait, hang on. Was this supposed to be a FREE printer? If yes, then I can see how you'd be upset... otherwise, it's possible they just ran out of them and can't get anymore within a reasonable timeframe. In that case, you can hardly say that you were gypped; if they're only charging you for what can be delivered to you, that's correct behavior.
No comments:
Post a Comment