man00
Apr 6, 05:44 PM
Planet theme (wallpaper) most of the others I tried were hit or miss far as running okay.
MacNut
Apr 23, 02:31 PM
I have ClickToFlash enabled and haven't clicked on any video. Yet, the scrolling stops when it hits the edge of the video.I notice that too, not a big deal, just don't scroll near the video.
KBP
Jun 21, 08:16 PM
Just called the Emeryville Apple store, and asked them if I could camp out there. They said they don't care but that I should check with Bay Street security. They gave me the number. The lady I talked to said that no camping is allowed on the sidewalk or street and police will be out that night. The time people can start lining up is at 7am. I called the Apple store on Powell in San Francisco and they said it no problem, no one ever gets bothered. Guess thats where I will be!
thequicksilver
Mar 31, 03:12 AM
Ridge Racer or Wipeout Pure have kept me going.
more...
Herdfan
May 6, 03:10 PM
I am going to be picking up my new 27" iMac at the store tomorrow. For the past 4 years I have been using a 24" Dell at 1920x1200. Since the 27" iMac is 2560x1140, do most people run it at native or something lower?
I am looking forward to the increased screen size so I can have more rows/columns viewable, but not sure I want them any smaller.
I sit about 24-30" away from the screen.
How would the 27" look at something lower?
I am looking forward to the increased screen size so I can have more rows/columns viewable, but not sure I want them any smaller.
I sit about 24-30" away from the screen.
How would the 27" look at something lower?
Euan
Sep 22, 06:23 AM
(as SOON as they update the line)
You may be waiting a while.
You may be waiting a while.
more...
Dreadnought
Nov 14, 03:16 PM
O by the way Dreadnought. I plan on passing you! I have had one work unit turned in on my mac pro now it was worth 700 points and it took 22 hours. I have also lost a work unit which gaves errors(this was before the SMP client when public beta) However I have one sitting on my computer at home finished, I just found out how to upload it. I had a configuration thing set wrong. And I will have another one done by the end of today. :) I will catch up pretty fast with your current output. ;)
So when are you planning on doing this? Don't see anywhere in the top 100 :p
and my G5 gets a bit of a rest instead of folding 24/7. It uses a lot of power and am trying to cut down my electric bill.
So when are you planning on doing this? Don't see anywhere in the top 100 :p
and my G5 gets a bit of a rest instead of folding 24/7. It uses a lot of power and am trying to cut down my electric bill.
homerjward
Sep 24, 09:37 PM
:confused: uhh...that made no sense but i think i know what you mean....
and consider putting down the joint (kidding)
and consider putting down the joint (kidding)
more...
SuAndMac
Mar 4, 08:33 PM
Thanks for responding so quickly. No, no chance of a different document. It is a very unique magazine. I have been working on this mag since last Monday - and have opened and closed it countless times. This is really STRANGE.
I'm not using backup software. I just use the 2nd hard drive to "double back up" in case. I do this at least once a day - or if I have done major changes to a job
With the permissions thing - I did a "file info" in another totally different job folder and went to details and changed the "group" access to "read and write" (cause it wasn't letting me save things in that folder even though me being the owner it said "read and write).
I am not on a network or anything - just a stand-alone osx 10.3.3
Have done a check and it doesn't seem to have affected anything else
I'm not using backup software. I just use the 2nd hard drive to "double back up" in case. I do this at least once a day - or if I have done major changes to a job
With the permissions thing - I did a "file info" in another totally different job folder and went to details and changed the "group" access to "read and write" (cause it wasn't letting me save things in that folder even though me being the owner it said "read and write).
I am not on a network or anything - just a stand-alone osx 10.3.3
Have done a check and it doesn't seem to have affected anything else
GGJstudios
May 5, 05:13 PM
You already asked about heat issues in another thread (http://forums.macrumors.com/showthread.php?t=1145803) and were told that you don't have heat issues. Your MBP is working as designed. You don't need to do anything to your thermal paste.
more...
jonnyb
Jun 19, 01:32 AM
This is wierd
I came past 10 minutes ago and there were about 20 people outside maybe more
I went looking for breakfast, came back and now there's only 7 people between me and the front of the queue
(an some guy is scrubbing the pavement clean)
either they are batch processing the early arrivers OR there was a big fight and the guy is scrubbing away the blood
Us special early arrivers are already inside. They let us in and we're lined up round the stairwell. ;)
I came past 10 minutes ago and there were about 20 people outside maybe more
I went looking for breakfast, came back and now there's only 7 people between me and the front of the queue
(an some guy is scrubbing the pavement clean)
either they are batch processing the early arrivers OR there was a big fight and the guy is scrubbing away the blood
Us special early arrivers are already inside. They let us in and we're lined up round the stairwell. ;)
Icaras
May 5, 12:42 AM
Planning on ordering a new 2011 iMac with a 256GB SSD and 2TB drive.
Current 2010 iMac hard drive has one drive with about 375GB.
In previous migrations - it was as simple as booting the source Mac with the "T" and allowing the transfer via Firewire.
The full image will not fit on the 256GB SSD. I know I can manually move user files to an external drive and reduce the image for a full copy and then move that data to the HD on the new iMac.
Any better suggestions?
Good question and thread. I'm in the same situation...I have roughly 400GB on my current drive and am planning to move to the dual hard drive setup as well....I was originally thinking of restoring from my Time Machine, but deselecting my Music folder, as thats where basically most of my space goes to, then manually dragging that from Time Machine onto the 1 or 2 TB HD.
This is the best I can think of at the moment. I'd love to hear other ideas though too.
Current 2010 iMac hard drive has one drive with about 375GB.
In previous migrations - it was as simple as booting the source Mac with the "T" and allowing the transfer via Firewire.
The full image will not fit on the 256GB SSD. I know I can manually move user files to an external drive and reduce the image for a full copy and then move that data to the HD on the new iMac.
Any better suggestions?
Good question and thread. I'm in the same situation...I have roughly 400GB on my current drive and am planning to move to the dual hard drive setup as well....I was originally thinking of restoring from my Time Machine, but deselecting my Music folder, as thats where basically most of my space goes to, then manually dragging that from Time Machine onto the 1 or 2 TB HD.
This is the best I can think of at the moment. I'd love to hear other ideas though too.
more...
DJY
Sep 23, 05:50 PM
Good work!
I myself am about to help another friend return to the folds.
She used to use a Mac years ago I believe, and I've been re-educating her over the past few weeks. She i believe is now keen to buy a Powerbook!
Only dilemma for me is to decide whether to help her buy a refurb or new one!
I myself am about to help another friend return to the folds.
She used to use a Mac years ago I believe, and I've been re-educating her over the past few weeks. She i believe is now keen to buy a Powerbook!
Only dilemma for me is to decide whether to help her buy a refurb or new one!
kbfr08
Apr 27, 10:19 PM
Damn, I really want this, but I'm strapped for cash right now. Purchasing it will depend if my website sale goes through.
The Edison poster is by far one my favorite of the entire series, I so wish I had the money to buy this, since it would make an amazing decoration for my office or my home.
The Edison poster is by far one my favorite of the entire series, I so wish I had the money to buy this, since it would make an amazing decoration for my office or my home.
more...
Nugget
Oct 19, 08:22 PM
I'll be with you in spirit....
http://macnugget.org/albums/japan2004/IMG_2338.thumb.jpg (http://macnugget.org/photos/japan2004/IMG_2338)
...from Texas USA.
http://macnugget.org/albums/japan2004/IMG_2338.thumb.jpg (http://macnugget.org/photos/japan2004/IMG_2338)
...from Texas USA.
Nishi100
May 4, 01:30 PM
just chatted with a representative:
TS - Lacey H (Level 3): Hi Robert Kaplarczuk,
TS - Lacey H (Level 3): Thank you for contacting Monoprice Tech Support.
TS - Lacey H (Level 3): My name is Lacey H.. Give me a moment while I review your question.
TS - Lacey H (Level 3): How are you doing today Robert Kaplarczuk?
Robert Kaplarczuk: very good I'm going to be purchasing the new iMacs and had a question about the HDMI converter
TS - Lacey H (Level 3): Alright, how can I help you with that?
Robert Kaplarczuk: it says that it goes in the mini display port which the new iMacs have
TS - Lacey H (Level 3): Correct
Robert Kaplarczuk: however at the botom of the page it also says thunderbolt compatible which the iMacs also have
Robert Kaplarczuk: how is it t
Robert Kaplarczuk: hunderbolt compatible
TS - Lacey H (Level 3): Correct
TS - Lacey H (Level 3): it it FULLY thunderbolt compatible
Robert Kaplarczuk: so it can be connected to the thunderbolt port as well?
TS - Lacey H (Level 3): Yes, the thunderbolt port is a mini displayport, basically an upgraded mini displayport port
Robert Kaplarczuk: ok thank you\
TS - Lacey H (Level 3): Is there anything else I can help you with today?
Robert Kaplarczuk: so basically any mini display port wire ordevice can be used in a thunderbolt
TS - Lacey H (Level 3): Yes, thunderbolt is fully backwards compatible, however that does not mean it will give your devices thunderbolt compatibility if they have the previous displayport version.
Robert Kaplarczuk: thank you
Question guys:
What she mean by previous display port version? Does her explanation mean that certain devices do not have to have Thunderbolt ports only mini display ports to plug ihnto the thunderbolt port?
I think she's saying that objects with mini-display ports won't suddenly change into a thunderbolt port, when you connect it to an iMac. They'll still only be able to carry video.
TS - Lacey H (Level 3): Hi Robert Kaplarczuk,
TS - Lacey H (Level 3): Thank you for contacting Monoprice Tech Support.
TS - Lacey H (Level 3): My name is Lacey H.. Give me a moment while I review your question.
TS - Lacey H (Level 3): How are you doing today Robert Kaplarczuk?
Robert Kaplarczuk: very good I'm going to be purchasing the new iMacs and had a question about the HDMI converter
TS - Lacey H (Level 3): Alright, how can I help you with that?
Robert Kaplarczuk: it says that it goes in the mini display port which the new iMacs have
TS - Lacey H (Level 3): Correct
Robert Kaplarczuk: however at the botom of the page it also says thunderbolt compatible which the iMacs also have
Robert Kaplarczuk: how is it t
Robert Kaplarczuk: hunderbolt compatible
TS - Lacey H (Level 3): Correct
TS - Lacey H (Level 3): it it FULLY thunderbolt compatible
Robert Kaplarczuk: so it can be connected to the thunderbolt port as well?
TS - Lacey H (Level 3): Yes, the thunderbolt port is a mini displayport, basically an upgraded mini displayport port
Robert Kaplarczuk: ok thank you\
TS - Lacey H (Level 3): Is there anything else I can help you with today?
Robert Kaplarczuk: so basically any mini display port wire ordevice can be used in a thunderbolt
TS - Lacey H (Level 3): Yes, thunderbolt is fully backwards compatible, however that does not mean it will give your devices thunderbolt compatibility if they have the previous displayport version.
Robert Kaplarczuk: thank you
Question guys:
What she mean by previous display port version? Does her explanation mean that certain devices do not have to have Thunderbolt ports only mini display ports to plug ihnto the thunderbolt port?
I think she's saying that objects with mini-display ports won't suddenly change into a thunderbolt port, when you connect it to an iMac. They'll still only be able to carry video.
more...
drenline
Mar 15, 07:55 PM
I thought displayout only works with the VGA adapter for mirrored images on the ipad1?
CorvusCamenarum
Jul 23, 12:29 AM
I suppose any evidence of a Strawhenge has long since been destroyed.
rdowns
Mar 3, 09:47 AM
Hi there,
Just wanted to make a suggestion on thread titles. I may be the only one, but I think that thread titles with repeated question marks (?????) are annoying and unnecessary. It only suggests unnecessary urgency and importance to the thread the poster has written. Therefore I think there should be a rule that states that threads with more than one repeated question mark in the title will be deleted until renamed.
Thanks,
Ams.
Yes. What we need are more rules at MacDisney. :rolleyes:
Just wanted to make a suggestion on thread titles. I may be the only one, but I think that thread titles with repeated question marks (?????) are annoying and unnecessary. It only suggests unnecessary urgency and importance to the thread the poster has written. Therefore I think there should be a rule that states that threads with more than one repeated question mark in the title will be deleted until renamed.
Thanks,
Ams.
Yes. What we need are more rules at MacDisney. :rolleyes:
Beanoir
Apr 18, 11:29 AM
A microfiber cloth usually does the trick, wet it a bit if you need to. For the screen use purpose made screen cleaner solution or wipes, available in all good computer stores.
DO NOT do what my other half did and clean the screen with furniture polish as she did on my new TV....needless to say she suffered for that.
DO NOT do what my other half did and clean the screen with furniture polish as she did on my new TV....needless to say she suffered for that.
jackerin
Jan 1, 09:04 AM
Don't bother getting a pressure sensitive keyboard unless you're already a proficient player.
I disagree. Pressure sensitivity opens possibilities for much more varied playing styles; even if he isn't proficient at the moment then a pressure sensitive one is much better to learn on. Without pressure sensitivity he might as well just use the option in Garageband to play using the computer keyboard.
I disagree. Pressure sensitivity opens possibilities for much more varied playing styles; even if he isn't proficient at the moment then a pressure sensitive one is much better to learn on. Without pressure sensitivity he might as well just use the option in Garageband to play using the computer keyboard.
Krafty
Jun 20, 05:40 PM
So what are people going to be doing to pass the time between now and getting the iPhone 4 on Thursday?
Working, but for today ill be laying in bed as I got owned by 2 yellow-jacket hornets while mowing the lawn and my foot feels like 2 nails have been shoved inside.
Working, but for today ill be laying in bed as I got owned by 2 yellow-jacket hornets while mowing the lawn and my foot feels like 2 nails have been shoved inside.
vniow
Nov 20, 11:17 PM
Originally posted by john123
Ya'll don't know me ?!?! I don't know any of you !!!
Where are jefhatfield? Spikey? Kela? The old crowd?
Are they all gone for good? Say it isn't so!
Woah there.
jefhatfield left for awhile, but he couldn't bear to stay away for too long. I haven't seen anyone named Kela since I got here and I've heard numerous times that spikey was banned forever.
Ya'll don't know me ?!?! I don't know any of you !!!
Where are jefhatfield? Spikey? Kela? The old crowd?
Are they all gone for good? Say it isn't so!
Woah there.
jefhatfield left for awhile, but he couldn't bear to stay away for too long. I haven't seen anyone named Kela since I got here and I've heard numerous times that spikey was banned forever.
harpster
Apr 7, 05:55 AM
I only had a few minutes this morning to look at this but I believe the main problem is your not calling the "mail" command. You have this line but it's not doing anything as it's just a variable...
$success = mail($webMaster, $emailSubject, $body, $headers);
If you just use this it should work...
mail($webMaster, $emailSubject, $body, $headers);
You may have other things to work out but this should send the email massage and you should be able to retrieve it at info@avenue19ni.com.
$success = mail($webMaster, $emailSubject, $body, $headers);
If you just use this it should work...
mail($webMaster, $emailSubject, $body, $headers);
You may have other things to work out but this should send the email massage and you should be able to retrieve it at info@avenue19ni.com.
No comments:
Post a Comment